The STM32F469VGT6 is a powerful microcontroller that is particularly suitable for applications that require high-performance computing, graphics processing, and rich peripherals. Its powerful graphics acceleration capabilities and rich peripheral interfaces make it widely used in industrial control, consumer electronics, and the Internet of Things. Combined with the STM32 ecosystem, developers can quickly implement complex functional designs.

In today's era of ubiquitous electronic devices, the power filter is a key component to ensure the purity of the power supply. Its stability and reliability are directly related to the normal operation of the entire electronic system. However, as time goes by, the internal components of the power filter will inevitably age. What kind of far-reaching impact will this have on its performance?

The ADXL103CE-REEL is a reliable and versatile accelerometer, particularly suited for applications requiring single-axis acceleration measurement with high precision and stability.

This solution uses dual-loop digital control of current inner loop + voltage outer loop. The switching frequency can reach 100KHz. It is equipped with protection functions such as short circuit, overcurrent, undervoltage, and overvoltage. The communication interface UART transmits data externally.

UnitedSiC UF3C065030K3S is a third-generation silicon-carbon (SiC) MOSFET produced by United Silicon Carbide (UnitedSiC). The device uses SiC material, which has higher switching speed, high temperature resistance and lower conduction loss compared to traditional silicon (Si)-based materials.

The solar LED street light controller based on TL431 is designed. The controller has functions such as overcharge, over-discharge protection, LED quasi-constant current control, and can automatically start and shut down the LED street light according to the brightness.

XCF32PFSG48C is a configuration memory from Xilinx (now part of AMD) that provides configuration data for FPGAs and CPLDs (complex programmable logic devices). It is a high-performance Configuration PROM designed to support the configuration of Xilinx series FPGAs.

In card reader mode, we can verify through the NCI command defined in PN7160. We can perform verification control through PN7160's own commands.

The MPU-6050 is a widely used Inertial Measurement Unit (IMU) that combines a 3-axis accelerometer and a 3-axis gyroscope.

This article aims to provide developers with a comprehensive introduction and application guide for the STM32F103C8T6. If you are looking for a high-performance, low-power microcontroller, the STM32F103C8T6 is undoubtedly your top choice.